Crystal structures and luminescence of two cadmium(II) polymers constructed from aromatic polycarboxylate and bis(1,2,4-triazol-1-yl)methane ligands

Two new coordination compounds, {[Cd₂(btrm)(ip)₂(H₂O)₂]?·?2H₂O} _n (1) and {[Cd₂(btrm)(hip)₂(H₂O)₄]?·?3H₂O} _n (2) (btrm?=?bis(1,2,4-triazol-1-yl)methane, H₂ip?=?isophthalic acid, H₂hip?=?5-hydroxy isophthalic acid), have been synthesized and structurally characterized. Compound 1 is a 3-D network with CdSO₄ topology. Compound 2 contains 1-D ladder structures, which are interconnected by classical hydrogen-bonding interactions (O–H?···?O) to lead to 3-D supramolecular architectures. Luminescence was performed on 1 and 2, both of which showed strong fluorescent emissions in the solid state at room temperature.     

Dynamic Behavior of Surfactants in Solution

Adsorption of various surfactants at the gas liquid interface is studied with equilibrium and dynamic surface tension measurements. The Wilhelmey plate method and maximum bubble pressure method are used for this study. Dynamic surface tension of solutions of different surfactants, sodium lauryl sulfate (SLS), polyoxyethylene glycol 4‐tert‐octyl phenyl ether (Triton X 100), poly‐oxyethylene(20) cetyl ether (Brij 58), and tetraethylene glycol mono‐n‐dodecyl ether (Brij 30), is measured at different concentrations. Adsorption of different surfactants is compared on the basis of equilibrium and dynamic behavior. Effectiveness and efficiency of different surfactants is found from equilibrium surface tension measurement. A new parameter is defined to quantify the dynamic behavior of adsorption, which gives the concentration of surfactant needed to reduce surface tension to half of its maximum reduction within a defined time available for adsorption. The dynamics of surfactant solution is quantified by using this parameter.     

桥头碳上氮杂芳基功能化的双吡唑甲烷与羰基钨反应

研究了(氮甲基咪唑-2-基)双(3,5-二甲基吡唑)甲烷(L¹),2-吡啶基双(3,5-二甲基吡唑)甲烷(L²)及4-吡啶基双(3,5-二甲基吡唑)甲烷(L³)与羰基钨的反应,合成了一系列以单齿,双齿及三齿氮配位的羰基金属衍生物LW(CO)₅ (L=L¹或L³),LW(CO)₄ (L=L¹,L²或L³)和LW(CO)₃ (L=L¹或L²).核磁,红外及X-射线单晶衍射分析表明这3种配体表现出了可变的配位方式.在LW(CO)₅中,当配体为L¹时,其倾向于通过咪唑氮与金属配位,而为L³则倾向于利用吡啶氮与金属作用;在LW(CO)₄中,配体L¹表现为通过咪唑氮和吡唑氮原子配位的[N,N']双齿配体,而L²和L³表现为通过吡唑氮原子配位的[N,N]双齿配体;在LW(CO)₃中,L¹和L²起着[N,N,N']三齿螯合配体的作用.     

Fe/MgO催化裂解甲烷制备碳纳米带

采用溶胶-凝胶法制备了Fe/MgO催化剂(E)。以甲烷为碳源,通过催化化学气相沉积法在E上生长出了碳纳米带(F),其结构和形貌经SEM和TEM表征。在最佳制备条件[E中Fe负载量为50%,甲烷流速70mL·min-1,于870℃反应1 h]下制备的F宽度约135 nm,厚约89 nm,长度在几十微米量级。     

单液滴撞击倾斜液膜飞溅过程的耦合Level Set-VOF模拟

采用耦合水平集--体积分数法(CLSVOF)对液滴撞击倾斜表面液膜后液膜的形态演化及飞溅过程进行数值模拟, 并对液滴撞击液膜过程中形成的空气卷吸现象进行研究并探讨了撞击角对此的影响, 分析了液滴撞击后液体内部的压力和速度分布, 对液滴撞击倾斜表面液膜的飞溅过程进行讨论, 并与实验结果进行了对比, 验证了CLSVOF方法研究液滴撞击倾斜液膜的可行性. 结果表明, 液滴撞击倾斜液膜时前后两部分飞溅现象产生的机理不同, 前半部分飞溅是由于压差引起的颈部射流, 而后半部分则是由液膜径向流动产生的飞溅现象. 随着撞击角的增大, 空气卷吸气泡数量减少.     

球状泡群内气泡的耦合振动

振动气泡形成辐射场影响其他气泡的运动, 故多气泡体系中气泡处于耦合振动状态. 本文在气泡群振动模型的基础上, 考虑气泡间耦合振动的影响, 得到了均匀球状泡群内振动气泡的动力学方程, 以此为基础分析了气泡的非线性声响应特征. 气泡间的耦合振动增加了系统对每个气泡的约束, 降低了气泡的自然共振频率, 增强了气泡的非线性声响应. 随着气泡数密度的增加, 振动气泡受到的抑制增强; 增加液体静压力同样可抑制泡群内气泡的振动, 且存在静压力敏感区(1–2 atm, 1 atm=1.01325×10⁵ Pa); 驱动声波对气泡振动影响很大, 随着声波频率的增加, 能够形成空化影响的气泡尺度范围变窄. 在同样的声条件、泡群尺寸以及气泡内外环境下, 初始半径小于5 μm 的气泡具有较强的声响应. 气泡耦合振动会削弱单个气泡的空化影响, 但可延长多气泡系统空化泡崩溃发生的时间间隔和增大作用范围, 整体空化效应增强.     

Endogenous Nanoparticles Strain Perovskite Host Lattice Providing Oxygen Capacity and Driving Oxygen Exchange and CH4 Conversion to Syngas

Particles dispersed on the surface of oxide supports have enabled a wealth of applications in electrocatalysis, photocatalysis, and heterogeneous catalysis. Dispersing nanoparticles within the bulk of oxides is, however, synthetically much more challenging and therefore less explored, but could open new dimensions to control material properties analogous to substitutional doping of ions in crystal lattices. Here we demonstrate such a concept allowing extensive, controlled growth of metallic nanoparticles, at nanoscale proximity, within a perovskite oxide lattice as well as on its surface. By employing operando techniques, we show that in the emergent nanostructure, the endogenous nanoparticles and the perovskite lattice become reciprocally strained and seamlessly connected, enabling enhanced oxygen exchange. Additionally, even deeply embedded nanoparticles can reversibly exchange oxygen with a methane stream, driving its redox conversion to syngas with remarkable selectivity and long term cyclability while surface particles are present. These results not only exemplify the means to create extensive, self‐strained nanoarchitectures with enhanced oxygen transport and storage capabilities, but also demonstrate that deeply submerged, redox‐active nanoparticles could be entirely accessible to reaction environments, driving redox transformations and thus offering intriguing new alternatives to design materials underpinning several energy conversion technologies.     

The Direct Partial Oxidation of Methane to Dimethyl Ether over Pt/Y2O3 Catalysts Using an NO/O2 Shuttle

Using a mixture of NO + O₂ as the oxidant enabled the direct selective oxidation of methane to dimethyl ether (DME) over Pt/Y₂O₃. The reaction was carried out in a fixed bed reactor at 0.1 MPa over a temperature range of 275–375 °C. During the activity tests, the only carbon‐containing products were DME and CO₂. The DME productivity (μmol g_cat^?1 h^?1) was comparable to oxygenate productivities reported in the literature for strong oxidants (N₂O, H₂O₂, O₃). The NO + O₂ mixture formed NO₂, which acted as the oxygen atom carrier for the ultimate oxidant O₂. During the methane partial oxidation reaction, NO and NO₂ were not reduced to N₂. In situ FTIR showed the formation of surface nitrate species, which are considered to be key intermediate species for the selective oxidation.     

Framework Effects on Activation and Functionalisation of Methane in Zinc-Exchanged Zeolites

The first selective oxidation of methane to methanol is reported herein for zinc-exchanged MOR (Zn/MOR). Under identical conditions, Zn/FER and Zn/ZSM-5 both form zinc formate and methanol. Selective methane activation to form [Zn-CH₃]⁺ species was confirmed by ¹³C MAS NMR spectroscopy for all three frameworks. The percentage of active zinc sites, measured through quantitative NMR spectroscopy studies, varied with the zeolite framework and was found to be ZSM-5 (5.7 %), MOR (1.2 %) and FER (0.5 %). For Zn/MOR, two signals were observed in the ¹³C MAS NMR spectrum, resulting from two distinct [Zn-CH₃]⁺ species present in the 12 MR and 8 MR side pockets, as supported by additional NMR experiments. The observed products of oxidation of the [Zn-CH₃]⁺ species are shown to depend on the zeolite framework type and the oxidative conditions used. These results lay the foundation for developing structure–function correlations for methane conversion over zinc-exchanged zeolites.     

Highly Selective CO2 Electroreduction to CH4 by In Situ Generated Cu2O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding

It is still a great challenge to achieve high selectivity of CH₄ in CO₂ electroreduction reactions (CO₂RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO₂ activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH₄. Here, Cu₂O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal–organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH₄ with partial current density of 10.8 mA cm⁻² at −1.4 V vs. RHE (reversible hydrogen electrode) in CO₂RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH₂O and *OCH₃) involved in the pathway of CH₄ formation are stabilized by the single active Cu₂O(111) and hydrogen bonding, thus generating CH₄ instead of CO.